Difficulty:
(1/5)

Supplies

• RSVP black pens
• Pattern paper
• Paper cutter
• Pair of scissors

Instructions

1. Unscrew the top of the pen so you have an empty tube and the ink attached to the top.
   
2. Cut a piece of pattern paper a length longer than the clear tube by 1 inch wide.
3. Start wrapping the paper around the ink tube. It's going to be a little hard if your paper is really thick. Try to roll the paper tightly and get it as small as you can.
   
   
4. Take just the piece of paper after you roll it and stick it into the clear tube of the pen and push it down as far as you can.
   
5. After you see how much extra there is on the paper that won't fit in the pen, cut it off with your scissors. And push the paper back down into the pen tube.
   
6. Now put the ink back into the pen and make sure you get it in the center of the pattern paper and screw on the top of the pen.
   
7. That's it! You are all set! You could surely stamp paper and put it inside these as well. These are so fun and I hope you make tons of them! I know I will be making more!